工程 Markdown

SGRi+EPRi+CPR_Intertek_Certificate_2020.5.14_SE-S-2001504-副本

已按原始 PDF 重建 2 页 · 2 页需重点核对

待完善

# SGRi+EPRi+CPR_Intertek_Certificate_2020.5.14_SE-S-2001504-副本

CERTIFICATE FOR EUROPEAN PRODUCT SAFETY MAXGE Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) MAXGE Type designation: SGRi, EPRi, CPR Certificate holder: MAXGE ELECTRIC TECHNOLOGY CO., LTD. No.299 East Changhong Road Deqing Economic zone, Wukang, Deqing 313200, Zhejiang China The product complies with the standard(s): MAXGE Date of expiry: 14 May, 2025 MAXGE AXGE EU Directive information: According to the principle of presumption of conformity, this certificate constitutes support for an EC Declaration of Conformity and CE marking according to the Low Voltage Directive 2014/35/EU. Additional information in Appendix MAXGE Certification Body: Intertek Semko AB, Product Certification Place: Kista - Stockholm Signed: Date: 14 May, 2020 Henrik Wikström This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Certificate. Only the Client is authorized to permit copying or distribution of this Certificate and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or Intertek Semko AB Page 1 of 2

MAXG MAXGE MAXGE Reference No. SE-S-2001504 MAXGE MAXGE MAXGE EN 61008-1:2012+A1+A2+A11+A12 EN 61008-2-1:1994 and A11 MAXGE advertisement of the tested material, product or service must first be approved in writing by Intertek.

Technical Data: Type designation SGRi, EPRi, CPR Rated voltage (V) 240V~ (1P+N), 415V~ (3P+N) Rated current (A) 25, 32, 40, 63, 80, 100A Frequency (Hz) 50/60 Trademark MAXGE Test Report 200100731SHA-001, -002 Product information IΔn= 0,03, 0,1, 0,3A, type-A and -AC IΔn= 0,1, 0,3A, type-A and -AC, type-S IΔc= Inc= 10kA & 6kA MAXGE Manufacturing Sites: MAXGE ELECTRIC TECHNOLOGY CO., LTD. No.299 East Changhong Road Deqing Economic zone, Wukang, Deqing 313200 Zhejiang China Safety related parts of the user instructions shall be written in a language acceptable to the country where the product is to be used. According to the principle of presumption of conformity, this certificate, which includes production control, constitutes support for an EC Declaration of Conformity and CE marking according to the Low Voltage Directive 2014/35/EU. This presumption can expire before end of validity of this certificate due to new issued Standard or Amendment and changes within the EU legislation. MAXGE MAXGE AXGE MAXGE Certification Body: Intertek Semko AB, Product Certification Place: Kista - Stockholm Signed: Date: 14 May, 2020 Henrik Wikström This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Certificate. Only the Client is authorized to permit copying or distribution of this Certificate and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or Intertek Semko AB Page 2 of 2

MAXG MAXGE MAXGE APPENDIX: Reference No. SE-S-2001504 MAXGE MAXGE MAXGE MAXGE advertisement of the tested material, product or service must first be approved in writing by Intertek.